F series Precise and Fast 160 Ton Servo Injection Molding Machine NPC160F

Products introduction

NPC precision machines deliver ultra-high accuracy, suitable for industries requiring consistent micro-tolerance products. Key Features: Accurate mold opening/closing and injection positioning High repeatability with stable cycle times Designed for demanding materials and micro parts Applications: Medical devices, electronics, precision engineering parts.

F series Precise and Fast 160 Ton Servo Injection Molding Machine NPC160F

Inquire

Download

Advantages of F series injection molding machine(NPC110F-NPC200F)：

F series machine is base on the standard servo motor machine to upgrade:

· Adopt with Electric plasticizing motor to reach energy saving, low noise, high precision and efficient performance
· The position between the mold and injection can be controlled in ±0.1mm
· The screw design realized good plasticizing performance, good self-clean function and good exhaust.
· Super ejector force
· Balance dual cylinder injection system
· PET special design screw
· 1 set Air blow device & Core-pull device
· 4/4 in/out water distribution
· Close loop injection
· Digital proportional back pressure system
· 10 inches LCD display with multi-language as optional
· Return line filtration system
· Automatic safety door device
· Oil temperature control system
· The joint connecting part of the oil cooler adopted tougher design
· Continental rigid design of oil tubes

Optional devices

PET preform spure cutting device

Preform mold suggestion

Automatic/ semi-automatic blow mold machine

Auxiliary machines suggestion

Take-out robot+take-out robot

Spring shut-off nozzle

Applicable area

Industrial parts – connectors, electronic housings, and technical components requiring high dimensional accuracy.
Medical & laboratory products – syringes, test tubes, and precision medical parts.
Automotive components – interior fittings, clips, and small functional parts.

		A	B
INJECTION UNIT
Screw diameter	mm	32	35
Screw L/D ratio	L/D	22.6	20. 7
Shot volume(theoretical)( ps)	cm³	129	154
Injection weight( ps)	g	117	140
Injection pressure	Mpa	310	259
Screw speed	rpm	200
CLAMPING UNIT
Clamping force	KN	1600
Open stroke	mm	435
Space between tie bars(W*H)	mm	470*470
Max.Mould height	mm	520
Min.Mould height	mm	180
Ejector stroke	mm	135
Ejector force	KN	50
General
Max.pump pressure	Mpa	17.5
Motor power/servo power	KW	31.3
Heating power	KW	8.7
Machine dimension(LWH)	m	5.281.342.06
Oiltank cubage	L	205
Machine weight	t	5.0