Servo 1300 Ton Injection Molding Machine NPC1300

Products introduction

high effiency,energy saving, high speed, stable,intelligent.high effiency,ene-rgy saving, high speed, stable,intelligent.high effiency,energy saving, high s-peed, stable,intelligent

Servo 1300 Ton Injection Molding Machine NPC1300

Inquire

Download

Advantages of standard machine-large sizes (range from NPC730 – NPC1600)：

(Compare to other brands, NPC’s machine standard equipped with:

· 1 step bigger motor and pump, make sure machine preforms, make sure the production with less cycle time; avoid over-load alarm in tropical area or hot weather
· Standard with Bi-metallic screw, machine works durable
· 1 set Air blow device & Core-pull device
· 4/4 in/out water distribution
· Close loop injection
· Digital proportional back pressure system
· 10 inches LCD display with multi-language as optional
· Return line filtration system
· Automatic safety door device
· Oil temperature control system
· The joint connecting part of the oil cooler adopted tougher design
· Continental rigid design of oil tubes
· *Machine loading in more than 2 containers

Optional devices

Chrome coating screw (soft uPVC)

Rigid PVC device

PET device

Multiple of core-pulling device and multiple air blow device

Hydraulic shut-off nozzle

Spring shut-off nozzle

Euromap robot interface

Applicable area

Suitable for the high production capacity request of the plastic pail and barrel.

Medium size to extra size household appliance plastic part(like air conditioner cover; fridge cover) ;extra large size of furniture ; dustbin container etc

Specification		NPC 1300
		A	B	C	D
INJECTION UNIT
Screw diameter	mm	110	120	130	140
Screw L/D ratio	L/D	26.2	24	22.2	20.6
Shot volume(theoretical)(ps)	cm³	5797	6899	8096	9390
Injection weight(ps)	g	5275	6278	7368	8545
Injection rate	g/s	826	983	1154	1338
Injection pressure	Mpa	203	171	146	126
Screw speed	rpm	90
CLAMPING UNIT
Clamping force	KN	13000
Open stroke	mm	1400
Space between tie bars(W*H)	mm	1350*1280
Max.Mould height	mm	1300
Min.Mould height	mm	600
Ejector stroke	mm	350
Ejector force	KN	270
General
Max.pump pressure	Mpa	17.5
Motor power/servo power	KW	60.5+60.5
Heating power	KW	85.55
21.2Machine dimension(LWH)	m	152.943.67
Oiltank cubage	L	1965
Machine weight	t	84