Servo 1000 Ton Injection Molding Machine NPC1000

Products introduction

high effiency,energy saving, high speed, stable,intelligent.high effiency,ene-rgy saving, high speed, stable,intelligent.high effiency,energy saving, high s-peed, stable,intelligent

Servo 1000 Ton Injection Molding Machine NPC1000

Inquire

Download

Advantages of standard machine-large sizes (range from NPC730 – NPC1600)：

(Compare to other brands, NPC’s machine standard equipped with:

· 1 step bigger motor and pump, make sure machine preforms, make sure the production with less cycle time; avoid over-load alarm in tropical area or hot weather
· Standard with Bi-metallic screw, machine works durable
· 1 set Air blow device & Core-pull device
· 4/4 in/out water distribution
· Close loop injection
· Digital proportional back pressure system
· 10 inches LCD display with multi-language as optional
· Return line filtration system
· Automatic safety door device
· Oil temperature control system
· The joint connecting part of the oil cooler adopted tougher design
· Continental rigid design of oil tubes
· *Machine loading in more than 2 containers

Optional devices

Chrome coating screw (soft uPVC)

Rigid PVC device

PET device

Multiple of core-pulling device and multiple air blow device

Hydraulic shut-off nozzle

Spring shut-off nozzle

Euromap robot interface

Applicable area

Suitable for the high production capacity request of the plastic pail and barrel.

Medium size to extra size household appliance plastic part(like air conditioner cover; fridge cover) ;extra large size of furniture ; dustbin container etc

Specification		NPC 1000
		A	B	C	D
INJECTION UNIT
Screw diameter	mm	100	110	120	130
Screw L/D ratio	L/D	24.2	22	20.2	18.6
Shot volume(theoretical)(ps)	cm³	4320	5227	6220	7299
Injection weight(ps)	g	3930	4757	5660	6643
Injection rate	g/s	698	844	1005	1179
Injection pressure	Mpa	230	190	160	136
Screw speed	rpm	100
CLAMPING UNIT
Clamping force	KN	10000
Open stroke	mm	1210
Space between tie bars(W*H)	mm	1160*1160
Max.Mould height	mm	1160
Min.Mould height	mm	500
Ejector stroke	mm	325
Ejector force	KN	245
General
Max.pump pressure	Mpa	17.5
Motor power/servo power	KW	60.5+60.5
Heating power	KW	81.5
21.2Machine dimension(LWH)	m	12.542.693.01
Oiltank cubage	L	1640
Machine weight	t	50