High Speed 650 Ton Paint Pail 20L Injection Molding Machine NPC650

Products introduction

Extra-long opening stroke, large servo motor, high speed capacity, fast plasticizing capacity

High Speed 650 Ton Paint Pail 20L Injection Molding Machine NPC650
High Speed 650 Ton Paint Pail 20L Injection Molding Machine NPC650
Inquire Download

Advantages of plastic pail high speed injection molding machine (NPC450 /NPC650/NPC730):

Complete machine structure special design for plastic pail or barrel with high speed producton:

  • · Extra large servo motor,compare to standard machine, the complete cycle time of pail high speed series can reach to 23-30 seconds (standard machine cycle time is 45-50 seconds)
  • · Extra-long opening stroke, the pail easier to take-out from the mold
  • · Special Bimetalic screw fits for the recycled plastics apply on this machine
  • · High speed plasticizing capacity system
  • · NPC650 produce with pail auto-knocking;NPC730 fits for equipped with IML system
  • · 1 set Air blow device & Core-pull device
  • · 4/4 in/out water distribution
  • · Close loop injection
  • · Digital proportional back pressure system
  • · 10 inches LCD display with multi-language as optional
  • · Return line filtration system
  • · Automatic safety door device
  • · Oil temperature control system
  • · The joint connecting part of the oil cooler adopted tougher design
  • · Continental rigid design of oil tubes

Optional devices

Hydraulic shut-off nozzle
Spring shut-off nozzle
Ejector on the fly
Screw on the fly
Euromap robot interface
Mold design suggestion
Take-out robot suggestion
Top-entry/Side-entry IML system

Applicable area

Suitable for the high production capacity request of the plastic pail and barrel. NPC650 fits for max 20L.

 

Specification

 

NPC 650

 

 

 

A

INJECTION UNIT

 

 

Screw diameter

mm

100

Screw L/D ratio

L/D

23

Shot volume(theoretical)(ps)

cm³

3142

Injection weight(ps)

g

2859

Injection pressure

Mpa

150

Screw speed

rpm

173

CLAMPING UNIT

 

 

 

 

 

Clamping force

KN

6500

Open stroke

mm

910

Space between tie bars(W*H)

mm

870*870

Max.Mould height

mm

900

Min.Mould height

mm

350

Ejector stroke

mm

250

Ejector force

KN

150

General

 

 

 

 

 

Max.pump pressure

Mpa

17.5

Motor power/servo power

KW

61+61

Heating power

KW

51.55

21.2Machine dimension(L*W*H)

m

9.8*2.14*2.71

Oiltank cubage

L

1070

Machine weight

t

27.3

Application

×

Contact Us

captcha
×

Inquire

*Name
*Email
Company Name
Tel
*Message