Request a Quote

NPC Develops a Turnkey Injection Molding & Packaging Solution for Disposable Cutlery in Malaysia

Project Overview

  • Industry: Food Packaging & Disposable Tableware
  • Location: Malaysia
  • Products: Disposable Spork
  • Injection Molding Machine: NPC 400H
  • Mold: 72-Cavity T-Series Stack Mold for Sporks
  • Automation: Automatic Part Take-Out, Stacking and Packaging
  • Key Result: Approximately 25% Improvement in Production Efficiency; Reduce Labour Cost.
 

CUSTOMER BACKGROUND

A leading food packaging and plastic products manufacturer in Malaysia approached NPC for a turnkey injection molding and automated packaging solution for disposable plastic spork.

With high-volume production requirements, the customer needed a system capable of producing cutlery consistently while integrating automated stacking and packaging. The goal was to increase production efficiency, reduce manual handling and lower labor costs without compromising product quality.

NPC developed an integrated production line combining the NPC 400H injection molding machine, a T-Series spork stack mold and an automatic packing machine to meet these requirements.

PROJECT CHALLENGES

01

High-Cavity Stack Mold Production

The project required a 72-cavity stack mold for PS disposable cutlery. This configuration placed high demands on molding stability, mold performance and process control to maintain consistent product quality across all cavities.
02

Complex Product Rib Design

The spork’s reinforcing ribs posed molding challenges: material buildup at rib roots caused uneven cooling and front-side sink marks, which heavily affected the appearance of thin-walled cutlery. We optimized rib geometry, cooling and packing pressure through repeated mold trials for qualified surface finish.
03

Specific Material Requirements

The customer specified a blend of 95% Styrolution PS 147F (GPPS) and 5% Styrolution PS 476L (HIPS). The material's limited flowability required higher injection pressure and sufficient clamping force to ensure proper mold filling and stable part formation.
04

Automated Stacking and Packaging

The production line was designed to stack and package 40 disposable cutlery pieces per pack. Precise program coordination between the injection molding machine, robot, stacking system, conveyor, and packaging machine was critical, as a fault in any unit could trigger an alarm and interrupt the entire line.

NPC'S TURNKEY PRODUCTION LINE SOLUTION

NPC integrated injection molding, robotic handling, stacking and packaging into a turnkey production line for disposable sporks.

Injection Molding System

The NPC 400H injection molding machine was paired with a customized 72-cavity T-Series stack mold to meet the customer's high-volume production requirements.

Mold and Process Optimization

Mold trials and process adjustments were carried out to improve molding stability and ensure consistent product quality across all cavities.

Robotic Take-Out System

An automated robot removes molded sporks from the mold and transfers them to the downstream stacking system.

Automatic Stacking and Packaging

The integrated packaging system automatically stacks 40 sporks per pack, reducing manual handling and supporting continuous production.

COMPLETE EQUIPMENT CONFIGURATION

The turnkey solution includes the following main equipment and auxiliary systems.
Equipment Category Configuration Function
Injection molding machine NPC 400H Main cutlery molding process
Mold T-Series spork stack mold 72-cavity spork production
Packaging Automatic packing machine Automated cutlery stacking and packaging
Material handling Auto loader Automatic material loading
Material supply Central material feeding system Centralized material delivery
Material preparation Hopper dryer Material drying
Material preparation Dehumidifying dryer Moisture control where required by the material process
Temperature control Chiller Cooling support for production equipment
Temperature control Mold temperature controller Mold temperature regulation
Material recycling Granulator Processing suitable production scrap
Material mixing Material mixer Mixing resin and color additives
Cooling Cooling tower Cooling support for the relevant system

PRODUCTION PROCESS: FROM RAW MATERIAL TO FINISHED PACKAGES

The integrated line follows a coordinated production workflow:
01

Raw MaterialHandling

02

Material Preparation

03

Injection Molding

04

Robotic Take-Out

05

Inspection and Sorting

06

Automatic Stacking

07

Packaging

08

Finished Products

Raw materials are supplied and prepared through the material handling and auxiliary systems before entering the NPC 400H injection molding machine. The 72-cavity stack mold forms the cutlery, after which the robot transfers the molded products to the automated handling and stacking stages.

The packaging machine then groups the cutlery into packs of 40 pieces, completing the automated packaging process.

This integrated setup reduces interruptions between production stages and helps the customer manage high-volume manufacturing more efficiently.

PROJECT RESULTS: APPROXIMATELY 25% HIGHER PRODUCTION EFFICIENCY AND REDUCED LABOR COSTS

Following line integration and commissioning, the customer achieved approximately 25% higher production efficiency while reducing labor costs through automated handling, stacking and packaging.

    Key benefits included:

  • Higher Production Efficiency: Integrated molding and packaging processes help minimize delays and streamline production.
  • Reduced Labor Costs: Automated part take-out, stacking and packaging reduce manual handling and labor requirements.
  • Consistent Packaging: Automated packaging ensures 40 disposable sporks per pack.
  • Streamlined Workflow: Integrated equipment enables coordinated operation from injection molding to finished-product packaging.

This turnkey solution helps disposable tableware manufacturers increase output, reduce reliance on manual labor and improve overall production efficiency.

WHY CHOOSE NPC FOR DISPOSABLE CUTLERY PRODUCTION?

NPC provides turnkey injection molding solutions integrating molding machines, precision molds, auxiliary equipment and automation into a complete production line.

Each solution is tailored to the customer's product design, material requirements and packaging needs. NPC also provides pre-shipment machine testing and adjustments, installation and commissioning guidance, and ongoing after-sales support to help ensure smooth production line operation.

Looking for an automated injection molding and packaging solution for disposable plastic spork?

Contact NPC to discuss your product specifications, production targets and automation requirements.

CUSTOMER TESTIMONIALS

NPC provides turnkey injection molding solutions integrating molding machines, precision molds, auxiliary equipment and automation into a complete production line.

Each solution is tailored to the customer's product design, material requirements and packaging needs.

Product Manager
live streaming equipment manufacturer

NPC provides turnkey injection molding solutions integrating molding machines, precision molds, auxiliary equipment and automation into a complete production line.

Each solution is tailored to the customer's product design, material requirements and packaging

Hardware Engineer
consumer electronics

NPC provides turnkey injection molding solutions integrating molding machines, precision molds, auxiliary equipment and automation into a complete production line.

Each solution is tailored to the customer's product design, material requirements and packaging

Industrial Designer
live streaming devices
Frequently Questions and Answers
传