Paint pail High-Speed series Servo injection Molding Machine NPC450

Products introduction

Paint pail High-Speed series Servo injection Molding Machine(450T-730T) Extra-long opening stroke, large servo motor, high speed capacity, fast plasticizing capacity

 Paint pail High-Speed series Servo injection Molding Machine NPC450
 Paint pail High-Speed series Servo injection Molding Machine NPC450
Inquire Download

Advantages of plastic pail high speed injection molding machine (NPC450 /NPC530/NPC730):

Complete machine structure special design for plastic pail or barrel with high speed producton:

  • · Extra large servo motor,compare to standard machine, the complete cycle time of pail high speed series can reach to 23-30 seconds (standard machine cycle time is 45-50 seconds)
  • · Extra-long opening stroke, the pail easier to take-out from the mold
  • · Special Bimetalic screw fits for the recycled plastics apply on this machine
  • · High speed plasticizing capacity system
  • · NPC650 produce with pail auto-knocking;NPC730 fits for equipped with IML system
  • · 1 set Air blow device & Core-pull device
  • · 4/4 in/out water distribution
  • · Close loop injection
  • · Digital proportional back pressure system
  • · 10 inches LCD display with multi-language as optional
  • · Return line filtration system
  • · Automatic safety door device
  • · Oil temperature control system
  • · The joint connecting part of the oil cooler adopted tougher design
  • · Continental rigid design of oil tubes

Optional devices

Hydraulic shut-off nozzle
Spring shut-off nozzle
Ejector on the fly
Screw on the fly
Euromap robot interface
Mold design suggestion
Take-out robot suggestion
Top-entry/Side-entry IML system

Applicable area

Suitable for the high production capacity request of the plastic pail and barrel. NPC450 fits for the pail under 10liter.

 

Specification

 

NPC450

 

 

 

A

INJECTION UNIT

 

 

Screw diameter

mm

80

Screw L/D ratio

L/D

21

Shot volume(theoretical)(ps)

cm³

2212

Injection weight(ps)

g

2013

Injection pressure

Mpa

197

Screw speed

rpm

186

CLAMPING UNIT

 

 

 

 

 

Clamping force

KN

4500

Open stroke

mm

770

Space between tie bars(W*H)

mm

770*770

Max.Mould height

mm

780

Min.Mould height

mm

250

Ejector stroke

mm

200

Ejector force

KN

110

General

 

 

 

 

 

Max.pump pressure

Mpa

17.5

Motor power/servo power

KW

68.5

Heating power

KW

33.2

21.2Machine dimension(L*W*H)

m

7.98*1.84*2.3

Oiltank cubage

L

815

Machine weight

t

17

Application

×

Contact Us

captcha
×

Inquire

*Name
*Email
Company Name
Tel
*Message